NETGEAR M4300-52G 1G/10G Managed Switch, SFP+, 176 Gb/s Switching, 2x 10G ETH Ports, 150W PSU, Rackmount | GSM4352S-100NES

M4300-52G 50-Port 1G/10G
Network Switch with SFP+
Expand your small-to-medium-size business’s network capacity with the M4300-52G 50-Port 1G/10G Managed Network Switch from Netgear. This fully managed rackmount network switch includes Layer 2, 3, and 4 feature sets such as hot-swappable mixed stacking, with up to eight switches in a single logical switch, but no license requirements to support video broadcast and other high-bandwidth applications.
Key Features
48 x Gigabit Ethernet Ports
2 x 10G Ethernet Ports
2 x 10G SFP+ Ports
176 Gb/s Switching Capacity
130.9 Mpps Forwarding Rate
800 MHz Processor | 1GB RAM
Rackmount Design
150W Power Supply | Redundancy Support
The M4300 series scales from 24x1G to 48x10G and up to 384 ports per stack. Nonstop forwarding, spine and leaf, edge-to-core connectivity for unified wired and wireless networks. Unstoppable operation with management unit hitless failover and no service interruption for the clients connected to the other switches in the stack.
NETGEAR M4300-52G Stackable Switch for Intelligent Edge
Provides 48 Gigabit access ports with 2 10GBASE-T and 2 10GBASE-X SFP+ uplink connectivity
All (4) 10G ports are independent and 1G backwards compatible for progressive transition to 10G speeds
With 172 Gbps non-blocking fabric, M4300-52G delivers L2/L3/L4 and IPv4/IPv6 rich services for virtualization (Auto-iSCSI prioritization), wireless access layer, IP video and unified communications
Virtual Chassis stacking provides non-stop forwarding (NSF) and hitless failover for highest availability (HA)
1 Gigabit model such as M4300-52G seamlessly stacks with 10 Gigabit models enabling line-rate spine and leaf topologies
Dual redundant, modular power supplies contribute to business continuity management
PoE deployment at the edge
Common for intermediate distribution frames (IDF) in K-12, horizontal or vertical ring stacking topologies greatly simplify Power over Ethernet deployments at the edge and bring network resiliency with distributed 10G uplinks in aggregation to the core.
Top-of-rack and server installations
For midsize server installations, two half-width M4300 10 Gigabit models can be paired in an effective single rack space for redundant top-of-rack. Non-stop switching, non-stop routing stacking technology ensures no single point of failure for servers connecting to the stack.
Spine and Leaf topologies
For typical collapsed core installations with a variety of 1G and 10G access ports in high-performance local area networks, M4300 10G models can stack with M4300 1G models creating ‘spine and leaf’ topologies, reducing oversubscription, even enabling line-rate aggregation to the spine.
Specifications
Interfaces (Inputs/Outputs)
48 x 10/100/1000 Mb/s Gigabit Ethernet (RJ45)
2 x 10Gb Ethernet (RJ45) (Uplink)
2 x 10Gb SFP+ (Uplink)
1 x 10/100/1000 Mb/s Gigabit Ethernet (RJ45) (Console)
1 x RS-232 (Console)
1 x Mini-USB (Console)
1 x USB-A (Console)
Protocols
Layer Services Supported: Layer 2 Support, Layer 3 Support, Layer 4 Support
Supported Protocols: Auto-VoIP, DHCP Server, IGMP Snooping, IPv4, IPv6, Link Aggregation, RADIUS
MAC Address Table Size
16K
VLAN IDs
4000
Security
Security Features: DHCP Snooping, DoS Attack Prevention, RADIUS Authentication, Storm Control
Static Routes
64
Standards
Supported IEEE Standards: 802.1ax, 802.1p, 802.1q, 802.1qbb, 802.1s, 802.1w, 802.1x, 802.3, 802.3ad
Performance
Latency: 0.9 to 1.2 µs
Forwarding Rate: 130.9 Mpps
Switching Bandwidth: 176 Gb/s (Non-Blocking)
Packet Buffer: 16 Mb
Computer
Flash Memory: 256 MB
CPU: Single-Core, Up to 800 MHz
Memory: 1 GB
Electrical
Power Draw: 47.4 W (Max)
AC Input Power: 110 to 220 VAC, 50 / 60 Hz
Power Supply Type: Internal
Environmental
Noise Level: 31.5 dB
General
Certifications: CE, FCC, RCM, VCCI, BSMI
Cooling System: Fan
Mean Time Between Failures (MTBF): 578,472 Hours
Rack Form Factor: 1 RU