Onkyo TX-NR7100, 9.2-Channel THX Certified AV Receiver, Klipsch Optimize Mode, HDMI 2.1 With 8K, 4K Gaming, Sonos Certified, Black | TX-NR7100

Onkyo TX-NR7100
9.2-Channel AV Receiver
Specification
Category
Specification
AMPLIFIER
Power Output (All Channels)
220 W/Ch (6 ohms, 1 kHz, 10% THD, 1-ch driven)
100 W/Ch (8 ohms, 20 Hz–20 kHz, 0.08% THD, 2-ch driven, FTC)
Dynamic Power
250 W (3 ohms, Front)
220 W (4 ohms, Front)
130 W (8 ohms, Front)
THD+N (Total Harmonic Distortion + Noise)
0.08% (20 Hz–20 kHz, half power)
Input Sensitivity and Impedance
200 mV rms/47 k-ohms (Line)
3.5 mV rms/47 k-ohms (Phono MM)
Rated RCA Output Level and Impedance
1 V rms/470 ohms (Subwoofer pre-out)
200 mV rms/470 ohms (Zone 2/Zone B line-out)
Frequency Response
10 Hz–100 kHz/+1 dB, -3 dB (Direct/Pure Audio)
Tone Control
±10 dB, 20 Hz (Bass)
±10 dB, 20 kHz (Treble)
Signal-to-Noise Ratio
106 dB (Line, IHF-A)
80 dB (Phono, IHF-A)
Speaker Impedance
4–16 ohms
TUNER
FM Range
87.5 MHz–107.9 MHz
AM Range
530 kHz–1,710 kHz
FM/AM Preset Memory
40 stations
GENERAL
Power Supply
AC 120 V~, 60 Hz
Power Consumption (Operating)
750 W
Power Consumption (Idle)
75 W
Power Consumption (Standby)
0.1 W
Dimensions (W x H x D)
17 1/8˝ x 6 13/16˝ x 14 15/16˝ (435 x 173.5 x 379.5 mm)
Weight
22.9 lbs. (10.4 kg)
UPC Code (B)
889951003496
CARTON
Dimensions (W x H x D)
21˝ x 10 7/16˝ x 18 7/16˝ (534 x 265 x 468 mm)
Weight
29.8 lbs. (13.5 kg)
ACCESSORIES INCLUDED
Power Cord
✓
Indoor FM Antenna
✓
AM Loop Antenna
✓
Speaker Setup Microphone
✓
Quick Start Guide
✓
Remote Control
✓
Two AAA (R03) Batteries
✓