Ubiquiti G2 Starter Kit, Door Hub, G2 Reader, 10x Access Cards, PoE Passthrough, White & Blue LEDs, Polycarbonate & Glass Material, IP55 Weatherproofing, White | UA-G2-SK

G2 Starter Kit
A quick start for Access with all you need for one door with one reader.
Features
(1) Door Hub
(1) G2 Reader
(10) Access Cards
Specifications
UA-Hub-Door
Details
Mechanical
Dimensions
174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3″)
Weight
363 g (12.8 oz)
Enclosure material
Polycarbonate
Mounting material
Polycarbonate
Hardware
Networking interface
(5) 10/100/1000 Base-T
Power method
PoE++
UL 294 Power-limited Class 2 PSU
UL 60950/62368 LPS/PS2 PSU
Max. power consumption
Without PoE output: 30W
With PoE output: 50W
PoE input
50V DC, 1A
PoE output
PoE passthrough, (4) PoE, 50V DC, total 20W
Button
(1) Factory-reset
LEDs
System: white/blue
Output relays: white
Digital input
Request to exit/request to enter/remote release/door position sensor
Dry output relay
Lock: 30V DC, 1A
Aux: 30V DC, 1A
Powered output relay
Lock: 12V DC, 1A
Aux: 12V DC, 0.33A
12V DC, 0.33A
Operating environment
Indoor use only
Operating temperature
0 to 40° C (32 to 104° F)
Operating humidity
5 to 95% noncondensing
UL 294 level
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 statement
Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade
Grade assignment: 1
Certifications
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level
UA-Hub-Door002, V01
Wiring Information
Details
Wiring gauge requirements (AWG)
Total length to device
Output load current at 12V DC
100mA
250mA
500mA
1A
6.1 m (20 ft)
22
22
22
18
15.2 m (50 ft)
22
22
22
18
30.5 m (100 ft)
22
22
18
18
UACC-Cable-DoorLockRelay (18 AWG) is recommended.
PoE cabling requirements
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 24 AWG (0.21 mm2) for horizontal or riser cable.
UA-G2
Details
Mechanical
Dimensions
93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4″)
Weight
82 g (2.9 oz)
Enclosure material
Polycarbonate, glass
Mounting
In wall, gang box
Weatherproofing
IP55
Hardware
Networking interface
(1) 10/100 MbE RJ45 port
Connectivity
BLE 4.1
Power method
PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range
48V DC
Max. power consumption
5W
ESD/EMP protection
Air: ±15kV, contact: ±8kV
Sensors
Proximity sensor
Speaker
(1) 8 ohm, 0.7W
LEDs
R/G/B/W
Button
(1) Factory-reset
NFC frequency
13.56 MHz
NFC read range
NFC standards
ISO 14443A, 14443B, 15693
NFC technology
NFC Tag 1,2,3,4,5
MIFARE Classic
MIFAREPlus
MIFARE Ultralight
MIFARE DESFire
Operating environment
Outdoor use
Operating temperature
-30 to 45° C (-22 to 113° F)
Operating humidity
5 to 90% noncondensing
UL 294 level
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 statement
Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. PoE cabling requirements: Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm2) for patch cords; 24 AWG (0.21 mm2) for horizontal or riser cable.
CAN/ULC-60839-11-1 Grade
Grade assignment: I
Certifications
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level
UA-G2/UA-G2-Black, V02
LED System
Steady blue: Adopted/device is ready
Steady white: Pending adoption
Blinking white/blue: Upgrading firmware
Strobing red: Emergency lockdown
UA-Card
Details
Mechanical
Dimensions
85.6 x 53.98 x 0.84 mm (3.37 x 2.13 x 0.03″)
Weight
5 g (0.18 oz)
Format
ISO 7810 ID-1
NFC frequency
13.56 MHz
NFC technology
ISO/IEC 14443 Type A
UniFi Access Proprietary Security Protocol
MIFARE technology
MIFARE DESFire